Delta Ultraviolet 1" Quartz Tube E-ES-EP-40 | 58-50340Delta Ultraviolet 1 in. Quartz Tube for E-40, ES-40 and EP-40 UV Sanitizers, 58-50340$9199
Delta Ultraviolet 1" Quartz Tube E-ES-EP-40 | 58-50340

Delta Ultraviolet 1 in. Quartz Tube for E-40, ES-40 and EP-40 UV Sanitizers, 58-50340

Ask a questionMPN 58-50340
$9199
Out of stock

30 day returns · Easy, with prepaid labels provided

Quick overview

  • Fits the 40 size units The 1 in. quartz tube for the Delta UV E-40, ES-40 and EP-40 sanitizers.
  • Protects the lamp The tube keeps the UV lamp dry in the wet chamber while its light passes through to the water.
  • Clean tube, full output Deposits on the tube cut the UV reaching the water, so Delta calls for pulling and inspecting it every six months.
  • Replace when cracked A cracked tube lets water into the dry electrical chamber, where it attacks the electrical components.
  • Fresh gasket every time Delta specifies a new compression gasket, part 44-02018, at every lamp change.
  • Pairs with lamp 70-18440 In the E-40 and ES-40 the tube houses the 110W lamp, Delta part 70-18440.
Full description and specifications ↓

Need a hand?

Bilingual support from pool professionals.

Send us a message

A pool professional will get back to you, usually the same business day.

About Delta Ultraviolet 1 in. Quartz Tube for E-40, ES-40 and EP-40 UV Sanitizers, 58-50340, SKU DUC-451-1003. We will include it with your message.

We use your details to answer this message and nothing else.

Frequently bought together

Current item Delta Ultraviolet 1 in. Quartz Tube for E-40, ES-40 and EP-40 UV Sanitizers, 58-50340
Delta Ultraviolet

1 in. Quartz Tube for E-40, ES-40 and EP-40 UV Sanitizers, 58-50340

$9199
Neptune Benson Pressure Switch 1/2 PSI, 70-02315
Delta Ultraviolet

Neptune Benson Pressure Switch 1/2 PSI, 70-02315

$7699
Delta Ultraviolet Bulb Cushion 44-02019 | 10002434
Delta Ultraviolet

Bulb Cushion 44-02019 | 10002434

$1199
Delta Ultraviolet 1" Quartz Tube E-ES-EP-20 | 58-50320
Delta Ultraviolet

1" Quartz Tube E-ES-EP-20 | 58-50320

$10599
Delta Ultraviolet Sealing O-Ring | 44-02018
Delta Ultraviolet

Sealing O-Ring | 44-02018

$1199
Jandy R0693900 TruClear PCB Cell Replacement Assembly for Pro Series Chlorine Generator
Jandy

R0693900 TruClear PCB Cell Replacement Assembly for Pro Series Chlorine Generator

$75499
Jandy Port Sensor Kit for 3 Port Cell with 16' Cable, R0452500
Jandy

Port Sensor Kit for 3 Port Cell with 16' Cable, R0452500

$24599
Subtotal

Similar products

Other products people compare with this one.

Product details

The Delta Ultraviolet 58-50340 is the 1 in. quartz tube for the E-40, ES-40 and EP-40 UV sanitizers. The UV lamp slides inside it, and the tube keeps the lamp dry in the wet chamber while the ultraviolet light passes through to the water.

Why the tube matters

A UV sanitizer only treats water its light can reach. Scale and film on the outside of the tube block part of that output, which is why Delta calls for pulling the tube and inspecting it every six months. A cracked tube is a bigger problem: it lets water into the dry electrical chamber, where it attacks the electrical components and can trip the GFCI. A tube with cracks should be replaced, not cleaned and reused.

Replacing it safely

Unplug the unit, shut off the circulation pump and confirm the pressure gauge reads zero before loosening the tube's sealing nut, since a tube released under pressure can be forced out of the housing. Let the lamp cool for 30 minutes and lift it out by its ceramic end. Remove the acorn nut, pull the old tube straight up, and seat the rounded end of the new tube gently in the receptor at the bottom of the chamber. Fit a new compression gasket, then tighten the nut without over tightening or cross threading it.

Freezing weather

Ice in the wet chamber can break the quartz tube. If the unit will not run through freezing weather, drain it, or keep water moving through it without interruption at 5 psi or more.

Specifications
Brand Delta Ultraviolet
Manufacturer part number 58-50340
Type Quartz tube for UV lamp
Diameter 1 in.
Fits Delta UV E-40, ES-40, EP-40
Lamp used in E-40 and ES-40 70-18440, 110W
Compression gasket 44-02018, replace at every lamp change
Lamp O-rings 44-02221, Viton, qty 2
Bulb cushion 44-02019
Inspection interval Every 6 months
Shipping weight 1.25 lb
Ships Parcel

Request a quote

Need a volume price, a freight quote, or pricing in writing before you order? We reply the same business day.

Request a quote

Customer reviews

Questions and answers

What people ask about this product, answered by our pool techs.

Which Delta UV models does this fit?
The E-40, ES-40 and EP-40. Delta lists 58-50340 as the quartz tube for the E-40 and ES-40, the 110W units that take lamp 70-18440. The smaller 5, 10 and 20 size E and ES models use different tubes, so check the model on the unit label first.
How often should the quartz tube be cleaned?
Delta recommends removing and inspecting it every six months. Clean the outside with vinegar or a weak muriatic acid solution of 4 parts water to 1 part acid, and never use abrasive cleaners. A new or freshly replastered pool can foul the tube faster, so check it more often.
How do I know the tube is cracked?
Water dripping from under the electrical enclosure bonnet, or a GFCI that trips because water has reached the electrical chamber, points to a cracked tube or a failed tube seal. Pull the tube and inspect it, and replace it if you find cracks.
What should I have on hand when I replace it?
A new compression gasket, Delta part 44-02018, which Delta says to fit at every lamp change. When you lift the lamp out, check that its two Viton O-rings, part 44-02221, and the bulb cushion, part 44-02019, are still in place, and handle the lamp by its ceramic end rather than the glass.
Ask your own question