Hunter MINICLIK, Mini Clik Rain Sensor

Hinter MINICLIK Mini-Clik Sensor, wired rain sensor, adjustable from ⅛" to ¾" of rainfall, includes 25' wire and aluminum mount

Hunter Mini-Clik rain sensor The Mini-Clik is a wired rain shutoff. When it rains past your set point, it breaks the signal from the controller to the valves, so the system skips the cycle. It is the low-cost way to stop watering in the rain. Spec Mini-Clik Type Wired rain shutoff sensor Shutoff setting Adjustable 1/8, 1/4, 1/2, or 3/4 in of rainfall How it senses Hygroscopic disks swell to trip; vent ring sets the dry-out rate Included 25 ft of 20 AWG wire and an aluminum bracket Warranty 5-year limited What it does and does not do The Mini-Clik senses rain only. It does not sense freeze. If you want a wireless rain sensor with no wire run, look at the Wireless Rain-Clik instead. Install notes Wire it inline on the sensor circuit of the controller. Mount it in the open where rain hits it, using the aluminum bracket. Rotate the cap to set the shutoff depth; turn the vent ring to match your soil dry-out.