Hunter I-40-04-SS-ON; I-40 Rotor, 4", full-circle, with opposing nozzle, 1" inlet, stainless steel riser, check valve, six nozzles included

Hunter I-40-04-SS-ON (i40-04-SS-ON) I-40 Rotor, 4", full-circle, with opposing nozzle, 1" inlet, stainless steel riser, check valve, six nozzles included

Hunter I-40-04-SS-ON Full-Circle Rotor with Opposing Nozzle The Hunter I-40 is the big gear-drive rotor for large open turf. This SKU is the full-circle, opposing-nozzle build on a 4-inch stainless riser. The opposing nozzle throws a primary and a secondary stream in opposite directions, so you get long-range and close-in coverage from one head. Specs Radius (opposing nozzle) 52 to 76 ft Arc 360 degrees, full-circle Inlet 1 in Pop-up height 4 in Pressure range 40 to 100 PSI Precipitation rate about 0.4 in/hr Nozzles included 6 opposing nozzles per rotor Riser Stainless steel Warranty 5 years Opposing nozzle vs standard I-40 The opposing-nozzle build reaches 52 to 76 ft. A standard, non-opposing I-40 runs shorter at roughly 44 to 69 ft. Use the opposing nozzle on wide fields where you need both distance and even close-in fill. It needs pressure: plan for 40 PSI or more at the head. For smaller turf that does not justify a 1-inch I-40, the Hunter I-25 stainless-riser rotor is the size down.