Hunter ECO-ID, Drip System Indicator

Hunter - ECO-ID Eco-Indicator Working Pressure: 15-50 PSI Inlet: ½" FPT (attach with PVC fitting or flexible swing joint) Visual: 6" yellow pop up stem Body/Stem: UV-resistant plastic

Hunter ECO-ID drip system indicator A drip zone hides underground, so you cannot see it run. The ECO-ID solves that. When the zone pressurizes, a 6-inch yellow stem pops up. Drop it into the drip zone and you get a clear visual that water is flowing during a system check. Spec Value Type Drip system running indicator Stem 6-inch yellow pop-up Pressure range 15 to 50 PSI Inlet 1/2-inch FPT Where it goes Install the ECO-ID at the far end of a drip run, past the last emitter, so it confirms pressure reached the whole line. Thread it onto a 1/2-inch FPT riser. Keep it inside the operating window of 15 to 50 PSI. Pair it with a regulated drip zone like the PCZ-101-40 drip zone kit .

The Eco-Indicator from Hunter provides a visual confirmation that an irrigation system is pressurized and operating. Whether you are using Professional Landscape Dripline, point source emitters, or using subsurface products, such as the Eco-Mat® or Eco-Wrap™, the Eco-Indicator will verify the system is pressurized to at least 15 PSI. It has a simple design and is easy to install. The bright yellow indicator stem will extend to a height of 6" when the system is running. When the system shuts off, the Eco-Indicator will retract to a protected position out of sight.