Irritrol 2400S, 1" Slip Valve without Flow Control

Irritrol 2400S 1 in. Electric Globe Valve Slip Connection 5 1/8 in. H x 3 in. W x 4 in. L

Irritrol 2400S 1" Slip Valve, No Flow Control The 2400S is an Irritrol 1" slip x slip valve without flow control. Slip ends solvent-weld straight to 1" PVC, so there are no threads to seal on an inline zone. It runs on standard 24 VAC. Specs Spec Value Size / inlet 1 in. slip x slip (solvent-weld) Flow control None Flow range 0.25 to 30 GPM Pressure range 10 to 150 psi Solenoid 24 VAC; 9.6 VA / 0.4 A inrush; 4.8 VA / 0.2 A holding Slip vs threaded Pick the slip valve when your manifold is glued PVC and you want a solvent-weld joint with no thread sealant. If your manifold uses threaded nipples, use the threaded version instead. Same guts, different inlet. The threaded sibling is the 2400 1" FPT globe valve . Service A dead zone on this valve is almost always the solenoid. Keep the R811-24VACG solenoid on hand for a five-minute swap.

The Irritrol® 2400 Series globe and 2600 Series angle valves are popular with users because of the convenience of their threaded bonnets, the reliability of their double-beaded diaphragm and the durability of their heavy-duty, corrosion and UV-resistant PVC construction. Fast and easy to install and service, these 1-inch residential plastic valves offer an encapsulated solenoid, internal/external bleed, an optional flow control feature, and are available in multiple configurations.