
Cover Valet CoverMate 7930 Spa Side Handrail with Base, SSHR
30 day returns · Easy, with prepaid labels provided
Quick overview
- Handrail and base together Supplied as the side handrail with its base, not as a bare rail.
- Spa side mounting Positioned at the side of the spa, where a hand goes on the way in and out.
- CoverMate 7930 The handrail listed under the CoverMate 7930 designation.
- Genuine Cover Valet Factory part number SSHR.
- A grab point where it is needed A fixed rail beside the spa gives something solid to hold on a wet surround.
- Confirm your mounting Check the surround and deck at the intended location before ordering, since a rail is only as good as what its base is fixed to.
Need a hand?
Frequently bought together

CoverMate 7930 Spa Side Handrail with Base, SSHR

Pool Buoy Floating Pool Umbrella, 5'7" Adjustable Shade with 5 Cup Holders, Black and White Stripe, PB-16011-BW
Get your unadvertised price ›

Pool Buoy Floating Pool Umbrella with Cup Holders, Harbor Blue, PB-16011-HAR
Get your unadvertised price ›
Similar products
Other products people compare with this one.
Saftron In-Ground Spa Return-to-Deck Handrail, Beige, 26 in. W x 42 in. H, S-326-B$17999
Saftron Return to Deck 4-Bend Fully Reinforced Handrail, 48 in. W x 32 in. H, Beige, RTD-448-B$26199
Koolgrips 6' Pool Rail Cover, 1.9" Diameter, Desert Tan, KGS603DT$7499
Koolgrips 6 ft Pool Rail Cover, 1.9 in. Diameter, Royal Blue, KGS601RB$5899
Koolgrips 4 ft Pool Rail Cover, 1.9" Diameter, Royal Blue, KGS 401 RB$5599
S.R. Smith 26in Figure-4 Handrail Single 304 SS | F4H-102S$29999
SuperPro 48 Inch Classic 4-Bend Handrail, Deck Mount, RAIL4B$30299
Perma-Cast Slide Flange with Mounting Hardware for 1.9 Inch OD Tubing Rails, Cycolac Plastic, White, PF-25-A$3999
S.R. Smith Stainless Steel Escutcheon Plate, 1.90" OD Rail, Marine Grade, EP-100F-MG$3399
Saftron Plastic Anchor Socket, ANCH-1$3399
Inter-Fab Stainless Steel Escutcheon Plate for 1.90" OD Rail, ESS 1.90$1399
Saftron Triton Series Return to Deck Handrail, 44 in. W x 36 in. H, Taupe, TRTD-144-T$33299
S.R. Smith Ring Handrail Set without Anchors 304 Grade SS | RRH-100$38499
S.R. Smith 26 in. Figure 4 Handrail Pair, 304 Stainless Steel, 1.90 in. OD, .049 in. Wall, F4H-102$39299
Saftron Triton Cross Braced Deck to Pool Handrail, 48 in., Beige, TDTP-148-B$39717
S.R. Smith 2-Bend 4' Stair Rail 304 SS | 2HR-4-049$43299
S.R. Smith 6' 2 Bend Stainless Steel Handrail, .049", 2HR-6-049$44099
S.R. Smith Designer Series Deck to Deck Return Stair Rail, 1.90 in. x .065 in. 304 Stainless Steel, DR-D3D50065$48199
S.R. Smith Residential 4 Bend Hand & Stair Rail 304 SS | DMS-101A$48299
S.R. Smith 5' 2 Bend Stainless Steel Handrail, .049", 2HR-5-049$49199
Product details
The Cover Valet SSHR is the CoverMate 7930 spa side handrail with base, a swiveling grab bar that gives a secure hand hold when entering and leaving a spa. Cover Valet describes its Spa Side Handrail as a sturdy handrail built for stability.
How it mounts
Cover Valet designs the handrail with an undermount base. The base slides under the spa cabinet and is held in place by the weight of the spa and the water, so no screws or drilling are needed. The rail swivels 360 degrees and locks in any position, so it can be set where it is most useful. The finish is carbon gray powder coat, and the end of the grab bar has a battery-powered LED light.
Spa size
The stated limit on the Cover Valet page is spa height: the handrail fits spas up to 40 in tall. Measure from the ground to the top of the spa shell before you order. The base needs room under the cabinet, so check the clearance at the side where you want the rail.
Before you order
The handrail and base are supplied together, so there is no separate base to source. The part number is SSHR and the UPC is 749932902081. Cover Valet publishes an installation manual for the handrail on its product page.
| Brand | Cover Valet |
|---|---|
| Manufacturer part number | SSHR |
| UPC | 749932902081 |
| Type | Spa side handrail |
| Series | CoverMate 7930 |
| Included | Handrail with base |
| Mounting | Undermount base, held by the weight of the spa and water, no drilling |
| Finish | Carbon gray powder coat |
| Swivel | 360 degrees, locks in position |
| Light | Battery-powered LED |
| Maximum spa height | 40 in |
| Shipping weight | 25 lb |
| Ships | Parcel |
Request a quote
Need a volume price, a freight quote, or pricing in writing before you order? We reply the same business day.
Customer reviews
Questions and answers
What people ask about this product, answered by our pool techs.
Does the base come with it?
What is the part number?
Where does it mount?
Is this a genuine Cover Valet part?
Get your unadvertised price ›




