30 x 55 ft Inground Pool Winter Covers

A 30 x 55 ft inground pool takes a 35 x 60 ft cover. The extra is the overlap, 2.5 ft on every side, and it laps onto the deck where the water tubes hold it down. Every cover on this page is listed by the pool it fits, and the covers cut for a larger pool that still work here are under Also fits.

1 covers made for this size

Also fits a 30 x 55 ft pool

These are cut for a larger pool but still work here. Each card shows the overlap it leaves on the sides and on the ends, so you can check it against your deck.

More covers that fit 1 out of stock

Inground winter cover questions

What size winter cover fits a 30 x 55 ft inground pool?

A 35 x 60 ft cover. That is the pool plus 5 ft, and it leaves 2.5 ft of overlap on every side for the water tubes.

How many water tubes does a 30 x 55 ft pool need?

24 tubes of 8 ft, or 19 of 10 ft. The 35 x 60 ft cover has a 190 ft edge, and the tubes go end to end around it on the deck. At this size the 10 ft tubes save five pieces.

Can I use a cover cut for a 30 x 60 ft pool?

Yes. A 35 x 65 ft cover on a 30 x 55 ft pool leaves 2.5 ft on the sides and 5 ft on the ends, which stays inside the 2.5 to 5 ft the overlap has to keep. It is listed under Also fits.

How are the water tubes filled, and can I use blocks instead?

Fill each tube two thirds to three quarters, never full, so the ice has somewhere to go. Never use bricks or blocks: they tear the cover, and they go into the pool with anyone who falls in. Neither the tubes nor the cover is a safety device.