
- Cover size
- 19 x 33 ft
- Pool size
- 14 x 28 ft
New customer? Create an account
Sign in to track an order, view past orders, start a return, and save the equipment you own so every part you see already fits it.
A 14 x 28 ft inground pool takes a 19 x 33 ft or 20 x 34 ft cover. The extra is the overlap, 2.5 or 3 ft on every side, and it laps onto the deck where the water tubes hold it down. Every cover on this page is listed by the pool it fits, and the covers cut for a larger pool that still work here are under Also fits.







These are cut for a larger pool but still work here. Each card shows the overlap it leaves on the sides and on the ends, so you can check it against your deck.








A 19 x 33 ft cover, or a 20 x 34 ft from the Cool Covers King line. The 19 x 33 is the pool plus 5 ft, 2.5 ft of overlap a side. The King is plus 6 ft, so 3 ft a side.
13 tubes of 8 ft, or 11 of 10 ft. That is the 19 x 33 ft cover's 104 ft edge, laid end to end. The tubes sit on the overhang out on the deck, so it is the cover you measure, not the pool.
A 21 x 37 ft cover leaves 3.5 ft on the sides and 4.5 ft on the ends. A 22 x 38 ft leaves 4 ft and 5 ft. Both are cut for a 16 x 32 ft pool, and both are listed under Also fits.
No. Bricks and blocks tear the cover, and if someone goes through the cover they go into the pool too. Water tubes float. Neither the tubes nor the cover is a safety device.
Stated terms at this size run from 8 to 25 years. Each card lists the one its manufacturer states, next to the cover size and the material, which is triple laminated polyethylene with heat sealed seams.