
- Cover size
- 30 x 55 ft
- Pool size
- 25 x 50 ft
New customer? Create an account
Sign in to track an order, view past orders, start a return, and save the equipment you own so every part you see already fits it.
A 25 x 50 ft inground pool takes a 30 x 55 ft or 31 x 56 ft cover. The extra is the overlap, 2.5 or 3 ft on every side, and it laps onto the deck where the water tubes hold it down. Every cover on this page is listed by the pool it fits, and the covers cut for a larger pool that still work here are under Also fits.





These are cut for a larger pool but still work here. Each card shows the overlap it leaves on the sides and on the ends, so you can check it against your deck.







A 30 x 55 ft cover, or a 31 x 56 ft from the Cool Covers King line. The 30 x 55 is plus 5 ft, 2.5 ft of overlap a side; the King is plus 6 ft, so 3 ft a side.
22 tubes of 8 ft, or 17 of 10 ft. The 30 x 55 ft cover has a 170 ft edge, and at this size the 10 ft tubes mean five fewer pieces to fill and carry.
A 35 x 55 ft cover leaves 5 ft on the sides and 2.5 ft on the ends. A 35 x 60 ft leaves the full 5 ft all round. Both are under Also fits.
Triple laminated polyethylene with heat sealed seams, black on tan on some lines. Stated warranties at this size run from 8 to 25 years, and each card carries its own.
No. A solid winter cover held down by water tubes keeps debris out. It will not hold a person or a pet, and water standing on top of it is a hazard of its own. That is also why bricks and blocks are never used as weights.