20 x 44 ft Inground Pool Winter Covers

A 20 x 44 ft inground pool takes a 25 x 49 ft cover. The extra is the overlap, 2.5 ft on every side, and it laps onto the deck where the water tubes hold it down. Every cover on this page is listed by the pool it fits, and the covers cut for a larger pool that still work here are under Also fits.

3 covers made for this size
More covers made for a 20 x 44 ft pool 3 out of stock

Also fits a 20 x 44 ft pool

These are cut for a larger pool but still work here. Each card shows the overlap it leaves on the sides and on the ends, so you can check it against your deck.

More covers that fit 3 out of stock

Inground winter cover questions

What size winter cover fits a 20 x 44 ft inground pool?

A 25 x 49 ft cover. That is the pool plus 5 ft, 2.5 ft of overlap on every side, and it is the size cut for this pool.

How many water tubes does a 20 x 44 ft pool need?

19 tubes of 8 ft, or 15 of 10 ft. The 25 x 49 ft cover has a 148 ft edge, and the tubes go end to end around it on the deck.

Which larger covers also fit a 20 x 44 ft pool?

A 25 x 50 ft cover leaves 2.5 ft on the sides and 3 ft on the ends. A 26 x 51 ft leaves 3 ft and 3.5 ft, and a 30 x 50 ft leaves 5 ft on the sides and 3 ft on the ends. They are listed under Also fits.

What warranties do the 20 x 44 ft covers carry?

Stated terms at this size run from 12 to 25 years. Each card lists the one its manufacturer states, along with the cover size and the material, triple laminated polyethylene with heat sealed seams.

Why does the cover have to be bigger than the pool?

The overlap is structural. It reaches from the lowered winter waterline back up over the coping and out onto the deck, and that overhang is the only place a water tube can sit. A cover cut to the water's own size works its way into the pool by midwinter.