Hammerhead 21 in. Vac Head with 40 ft. Cord, HH1310

The Hammerhead HH1310 is the 21 in. vacuum head with a 40 ft. floating cord. It arrives as the head, motor, propeller and one superfine debris bag, ready to run off a 12 volt battery.

How it works

Rather than drawing on the pool filter, the Hammerhead carries its own motor. A pressurized 35 lb thrust motor spins a two blade propeller that pulls water and debris up through an 8 in. throat and into the bag, so leaves and silt never reach the pump basket or the filter. Because the vacuum is self contained, it can be walked around a pool that is too dirty to put through the filtration system.

Built for repeated use

The head is injection molded and rides 1 in. above the pool floor on non marking, bearing free cast urethane wheels. The pole mount is a stainless swivel and the hardware is stainless throughout. The head and motor together weigh 11 lb.

What you still need

This listing does not include the 12 volt deep cycle marine battery, the charger, the battery case, the connectors, the caddy cart or the on/off switch. Those are separate items, so plan the power side of the setup before the first use. A 60 ft. cord version of the same head is available if the 40 ft. cord is short for your pool.