
S.R. Smith 18" Rubber Mounting Pad, 08-501
30 day returns · Easy, with prepaid labels provided
Quick overview
- S.R. Smith part 08-501 The factory pad, sized and cut to the original.
- 18 inch The larger of the S.R. Smith mounting pad sizes.
- Rubber A rubber pad, so it stays flexible and grips rather than sliding on wet concrete.
- Protects the deck The pad takes the load and the vibration instead of the deck surface under it.
- Wear item Pads go hard, tear at the bolt holes and compress over the years, and a flattened pad lets equipment rock.
- Simple swap Replaced with the equipment lifted or unbolted, without touching the anchors.
Need a hand?
Frequently bought together

18" Rubber Mounting Pad, 08-501

Pool Buoy Floating Pool Umbrella, 5'7" Adjustable Shade with 5 Cup Holders, Black and White Stripe, PB-16011-BW
Get your unadvertised price ›

Pool Buoy Floating Pool Umbrella with Cup Holders, Harbor Blue
Get your unadvertised price ›
Similar products
Other products people compare with this one.
Perma-Cast Slide Flange, Aluminum with 4 Anchors, 1.9" Rail, PF-3119-A$3699
Hayward Wedge Bolt and Washer Replacement, SPX1392CA$2599
Hayward 2" x 4" Gutter Drain Grate with Screws, SP1019BA$1399
Perma-Cast Brass Two Piece Anchor Cover with Screw$3799
Pentair Gutter Drain and Grate, 2-1/2" x 6", White, 542039$2399
Perma-Cast 4" Plastic Deep Bronze Anchor Socket for 1.9" OD Tubing, PS-4019-P$1799
Perma-Cast Aluminum Ladder Flange 1.5" OD Tubing, White, PF-2115-L$1799
Pentair Deck Jet Accessory Kit, 590011$3099
Waterway Concrete Volleyball/Umbrella Pole Holder, Gray, 540-6707$1999
Waterway Gutter Drain, 2" x 4", Gray, 640-2907$1399
NPT 5 in. Non-Skid 3 FT Depth Marker Frost Proof Tile, DM52-2030$2999
Perma-Cast Hanover No. 30 Wedge Assembly with Washer and 1-1/2" Bolt, PW-3C$1599
Inlays 6 FT Depth Marker Tile, 6x6 Non-Skid Deck, 4 Inch Numbers, C620060$2399
Waterway 2 inch by 4 inch Beige Deck and Gutter Drain, 640-2909-BEI$2399
Inlays 0.9 with M Depth Marker, 6x6 Tile, 4" Numbers, Non-Skid (Deck), C622709$1999
Hayward SP1019 Deck Drain, 2" x 4"$1599
Dunn-Rite 1.90" White Finishing Cap for Pool Anchor Point, ANCHOR7$1999
Pentair Machine Screw 8-32x1/2" Phillips, Stainless Steel, 72546$1599
Active Pool Supply LARGE ROPE FLOAT 5"x9" | PS688$1699
S.R. Smith Ladder Rubber Bumper – Female 1.9" | White | WRB-101A$1499
From S.R. Smith
S.R. Smith lighting
S.R. Smith Treo 5W LED Color Changing RGB Light, 80' Cord, FLED-C-TR
S.R. Smith 60W 6 Amp Single Zone LED Light Control Power Tower, PT-6001
S.R. Smith RGB Treo LED Pool Light 12V, 30' Cord, FLED-C-TR-30
S.R. Smith WIRTRAN Control System with 3 Treo Color LED | 3TR-WIRTRAN
S.R. Smith parts
S.R. Smith Cantilever Steel Jump Stand with Jig, Radiant White, 69-209-001
S.R. Smith 6' White Spring Assembly for 606 Cantilever Jump Stand, 69-209-026
S.R. Smith 5W Replacement RGB LED Lamp, 12VAC, FLED-LAU-C
S.R. Smith 18" Commercial Mounting Kit, 67-209-903-SS


Product details
The S.R. Smith 08-501 is an 18 inch rubber mounting pad, the factory part rather than a cut to fit substitute.
What the pad is for
A mounting pad sits between deck mounted pool equipment and the concrete beneath it. Rubber gives a little under load, spreads the pressure over a wider area and keeps hardware from grinding directly against the deck surface.
When to change it
Pads are a wear item. Sun, chlorinated water and years of load turn rubber hard, tear it around the fastener holes and compress it flat. Once a pad has taken a set, the equipment above it can rock, which puts the load back onto the anchors and the deck. Swapping in a fresh pad is a short job and it is done without disturbing the anchors themselves.
| Brand | S.R. Smith |
|---|---|
| Manufacturer part number | 08-501 |
| UPC | 840671101138 |
| Type | Rubber mounting pad |
| Size | 18 inch |
| Material | Rubber |
| Shipping weight | 0.2 lb |
| Ships | Parcel |
Request a quote
Need a volume price, a freight quote, or pricing in writing before you order? We reply the same business day.
Customer reviews
Questions and answers
What people ask about this product, answered by our pool techs.
What size is this pad?
What is it made of?
When should a mounting pad be replaced?
Is this the S.R. Smith original?
Get your unadvertised price ›




