CaliMar CaliGlow Pro P-Series Nicheless LED Pool and Spa Light, 12V, 50 ft Cord, CMAR2L20W50P

The CaliMar CaliGlow Pro P-Series CMAR2L20W50P is a 12V nicheless color changing LED light for inground pools and spas, rated at 900 lumens and supplied with a 50 ft cord.

What it does

This is a 2 inch nicheless fixture, 5.48 inches long and 2.2 inches across the face. It installs into standard 1-1/2 inch or 2 inch Schedule 40 PVC rather than a traditional niche. Its core is solid marine grade stainless steel, and a machined groove system draws cooler water from the bottom of the housing up across the heatsink while the light runs. The manufacturer states this holds LED temperatures up to 40 percent below a sealed polymer housing, and that the light keeps over 90 percent of its output at 30,000 hours.

Programs and control

The light has fourteen programs that are selected from the wall switch: seven color shows, five fixed colors and a color lock with a return that recalls it. Cycle the switch off and on the number of times that matches the program. It also works in P, J and H modes.

Fit and compatibility

The CaliGlow Pro P-Series is a direct replacement for Pentair GloBrite and MicroBrite color lights, Jandy Watercolors HydroCool P-Series lights and Savi P-Series lights. It is compatible with Pentair GloBrite and MicroBrite lights and Jandy HydroCool lights in Pentair mode. Locking tabs at the housing base allow use in the GloBrite niche, but it will not fit a Jandy bubbler. Both the upper and lower o-rings are included.