
Century 3/4 HP Pool Pump Motor, 115/230V, C-Face Threaded Shaft, B127
30 day returns · Easy, with prepaid labels provided
Quick overview
- Dual voltage Wired for either 115V or 230V, so it drops into most existing installations.
- C-face with threaded shaft Mounts C-face and takes a threaded impeller, matching the pumps it replaces.
- Stainless shaft 303 stainless steel shaft with 7/16" threads resists the corrosion that kills plated shafts.
- Switchless design A permanent split capacitor motor with no start switch to burn out.
- Open dripproof, 50 C ambient Rated for continuous duty at a 50 C ambient on a rigid base.
- Ball bearings both ends Ball bearings at the drive end and the opposite drive end, running counterclockwise from the pump end.
Need a hand?
Frequently bought together

Century 3/4 HP Pool Pump Motor, 115/230V, C-Face Threaded Shaft, B127

Century 1-1/2 HP 3450 RPM 56Y Frame Square Flange Pool Pump Motor, 115/230V, B2854V1

Century VGreen Evo Variable Speed 1.65 THP Square Flange Pool Pump Motor, 230/115 V, 48Y Frame, EVQ165

Century 1.65 HP Square Flange Pool and Spa Pump Motor, 3450 RPM 48Y, Threaded Shaft, HSQ165
Similar products
Other products people compare with this one.
Century B229SE Threaded Up Rated 1.5 HP Pool Pump Motor, 115/230V$35499
Century 56J Threaded UR .75 HP 115/230V Pool Pump Motor, B227SE$27799
Century Pro HST110 C-Face Pool and Spa Pump Motor, 1.1 THP, 115/230V$30099
Century Pump Motor, Up Rated, .75 HP, 3450 RPM, 115/230 V, 56J, Threaded Shaft, UST1072$26299
Century Up Rated Pool Pump Motor, 1.5 HP, 115/230V, Square Flange, USQ1152$36999
Century Threaded .75 HP Polaris P61 Booster Pump Motor 115/230V, B625$31799
Century Keyed Full Rated Pool and Spa Pump Motor, 1 HP, 115/230V, B122$33199
Century SQ1072 3/4 HP Square Flange Pool Pump Motor, 115/230V$30599
Century ODP Thru-Bolt Pool and Spa Pump Motor, 2 HP, 115/230V, 48Y Frame, BN40SS$33799
Century Motors Magnetek Threaded Shaft Motor 1 HP 115-208-230V 56 Round Frame | B654$42899
Hayward 1HP Motor, Threaded Shaft, Single Phase, 60 Cycle 115/230V, SPX1607Z1M$39199
Century Energy Efficient Pump Motor, Full Rated, 1.5 HP, 115/230V, ST1152$41099
Century Pro Square Flange Motor, 2.2 THP, 3450 RPM, 230V, 48Y, Threaded Shaft, HSQ220$42899
Century Centurion Pro Square Flange Motor, 0.95 THP, 3450 RPM, 115/230 V, 48Y, Threaded Shaft, HSQ095$28399
Century Centurion Pro HST225 Motor, 2.25 HP, 3450 RPM, 115/208-230 V, 56J, Threaded Shaft$42399
Century Motors AO Smith Threaded Shaft Motor 1HP 115V/230V 56 Round Frame | ST1102$33399
Century 2 HP 2 Speed 230V 48 Frame Pool Pump Motor, BN51$42099
Century Motors AO Smith Threaded Shaft Motor 1HP 115V/230V 56 Round Frame Full-Rate Energy Efficient | CT1102$39599
Century BN35V1 Motor, 1.5 HP, 115/230V, 48Y Frame (SS)$28699
Century E-Plus B2841V1 Square Flange Full-Rated Pool Pump Motor, 1 HP$39199
Product details
The Century B127 is a 3/4 HP replacement pool pump motor, dual voltage at 230/115 V, running 3450 rpm on a 1.5 service factor. It is an S56J frame motor with C-face mounting and a threaded shaft, which is the combination used by a large run of older pool pumps.
How it is built
It is a permanent split capacitor motor, switchless, so there is no centrifugal start switch to fail. The enclosure is open dripproof on a rigid base, rated for continuous duty at a 50 C ambient, with ball bearings at both ends and a UL 1081 design. Rotation is counterclockwise viewed from the pump end.
The shaft
The shaft is 303 stainless steel with 7/16" threads, 0.625" in diameter and a 2.57" extension, and the motor measures 12.01" overall. Stainless matters here: a plated shaft in a wet pump seal chamber will pit and then chew up every seal you fit afterwards. Century lists ST1072 as a substitute part number for this motor.
Change the pump shaft seal while the motor is out. It is a few dollars against a job you do not want to do twice.
| Brand | Century |
|---|---|
| Manufacturer part number | B127 |
| UPC | 786674011886 |
| Substitute part number | ST1072 |
| Horsepower | 3/4 HP, 0.56 kW |
| Voltage | 230/115 V |
| Speed | 3450 rpm |
| Service factor | 1.5 |
| Frame | S56J |
| Phase | 1 |
| Frequency | 60 Hz |
| Current | SF 6.0/12.0 A |
| Enclosure | Open dripproof |
| Mounting | C face, rigid base |
| Shaft | 303 stainless steel, 7/16" threads |
| Shaft dimensions | 0.625" diameter, 2.57" extension |
| Overall length | 12.01" |
| Shipping weight | 23 lb |
| Ships | Parcel |
Request a quote
Need a volume price, a freight quote, or pricing in writing before you order? We reply the same business day.
Customer reviews
Questions and answers
What people ask about this product, answered by our pool techs.
Is this motor 115V or 230V?
What frame and shaft does it have?
Is ST1072 the same motor?
Should I replace the shaft seal at the same time?
Get your unadvertised price ›



