Sta-Rite 35505-1424 adapter to tank O-ring, 2-3/8 inch inside diameterSta-Rite O-Ring, 2-3/8" ID, Adapter to Tank, PLM/PLD, 35505-1424 In stock$1699
Sta-Rite 35505-1424 adapter to tank O-ring, 2-3/8 inch inside diameter

Sta-Rite O-Ring, 2-3/8" ID, Adapter to Tank, PLM/PLD, 35505-1424

Ask a questionMPN 35505-1424
$1699
In stock

30 day returns · Easy, with prepaid labels provided

Quick overview

  • Adapter to tank seal Seals the joint between the filter adapter and the tank, the spot that weeps first on an aging filter.
  • Exact size 2-3/8 inch inside diameter with a 3/16 inch cross section, so it seats in the original groove without stretching.
  • Genuine Sta-Rite Factory part number 35505-1424 rather than a hardware store O-ring cut to a close size.
  • Wide model coverage Listed across the Sta-Rite System 3 sand, cartridge and DE filters and the System 2 modular media PLM100 and PLM150.
  • AquaTools too Also listed for AquaTools permanent media AT84100 and AT84150 and the AT8230 and AT8236 DE filters.
  • Cheap insurance Worth replacing any time the tank is opened, since a hardened O-ring will not reseal once it has been disturbed.
Full description and specifications ↓

Need a hand?

Bilingual support from pool professionals.

Send us a message

A pool professional will get back to you, usually the same business day.

About Sta-Rite O-Ring, 2-3/8" ID, Adapter to Tank, PLM/PLD, 35505-1424, SKU STA-051-2701. We will include it with your message.

We use your details to answer this message and nothing else.

Frequently bought together

Current item Sta-Rite O-Ring, 2-3/8" ID, Adapter to Tank, PLM/PLD, 35505-1424
Sta-Rite

O-Ring, 2-3/8" ID, Adapter to Tank, PLM/PLD, 35505-1424

$1699
Sta-Rite 170145 System 3 S7M120 Large and Small Cartridge Set, 25021-0200S and 25022-0201S
Pentair

Sta-Rite 170145 System 3 S7M120 Large and Small Cartridge Set, 25021-0200S and 25022-0201S

$46499
Filbur Sta-Rite S7D75 Full Filter Grid Set (11 Grids), FS-3037
Unicel Filter Cartridges

Filbur Sta-Rite S7D75 Full Filter Grid Set (11 Grids), FS-3037

$24599
Pentair Genuine OEM Valve Body O-Ring for Cristal-Flo II and Sand Dollar Filters, 272541
Pentair

Genuine OEM Valve Body O-Ring for Cristal-Flo II and Sand Dollar Filters, 272541

$1199
Pentair Genuine OEM Triton II Air Relief Tee Assembly, 154689Z
Pentair

Genuine OEM Triton II Air Relief Tee Assembly, 154689Z

$3499
Pentair Genuine OEM Sand Filter Drain Cap, 154712
Pentair

Genuine OEM Sand Filter Drain Cap, 154712

$3399
Sta-Rite 21 in. Filter Tank O-Ring, System 3, 24850-0008Z
Sta-Rite

21 in. Filter Tank O-Ring, System 3, 24850-0008Z

$7099
Subtotal

Product details

This is the Sta-Rite 35505-1424 adapter to tank O-ring, the seal between the filter adapter and the tank on PLM and PLD style filters. It measures 2-3/8 inches inside diameter with a 3/16 inch cross section.

Why it fails

An O-ring in this position spends its life compressed, warm and in chlorinated water. Over a few seasons it takes a permanent set, hardens and loses the springiness that made it seal. The result is a slow weep at the adapter that shows up as a wet spot on the pad or a drop in pressure as the filter pulls air.

Model coverage

It is listed across a broad run of Sta-Rite filters: the System 3 sand models S7S50 and S8S70, the System 3 cartridge models S7M120, S8M150, S7M400 and S8M500, the System 3 DE models S7D75 and S8D110, and the System 2 modular media PLM100 and PLM150. It is also listed for AquaTools permanent media AT84100 and AT84150 and the AT8230 and AT8236 DE filters.

Fitting

Clean the groove and the mating face before the new ring goes in, and use a silicone lubricant made for pool equipment. Petroleum based grease attacks the material and will have you back at the same joint next season.

Specifications
Brand Sta-Rite
Manufacturer part number 35505-1424
UPC 788379830359
Type O-Ring
Location Adapter to tank
Inside diameter 2-3/8"
Cross section 3/16"
Fits, System 3 sand Sta-Rite S7S50 and S8S70
Fits, System 3 cartridge Sta-Rite S7M120, S8M150, S7M400 and S8M500
Fits, System 3 DE Sta-Rite S7D75 and S8D110
Fits, System 2 modular media Sta-Rite PLM100 and PLM150
Fits, AquaTools Permanent media AT84100 and AT84150, DE AT8230 and AT8236
Shipping weight 0.02 lb
Ships Parcel

Request a quote

Need a volume price, a freight quote, or pricing in writing before you order? We reply the same business day.

Request a quote

Customer reviews

Questions and answers

What people ask about this product, answered by our pool techs.

What size is this O-ring?
2-3/8 inch inside diameter with a 3/16 inch cross section.
Where does it go in the filter?
It seals the adapter to the tank on PLM and PLD style filters.
Which filters is it listed for?
Sta-Rite System 3 sand, cartridge and DE filters, the System 2 modular media PLM100 and PLM150, and AquaTools permanent media and DE filters.
Should I lubricate it?
Use a pool rated silicone lubricant. Petroleum grease swells and softens O-rings and shortens their life.
Ask your own question