Jandy O-Ring 47044233R$3752
Quick overview
- Silicone Made in silicone, which holds up better than nitrile to heat and to pool water over time.
- Sized 7-1/4 x 7-3/4 x 1/4 in A large diameter seal, so measure against the old one before ordering.
- Genuine replacement Jandy part number 47044233R.
- Also listed as PL7130 The same seal carries the PL7130 reference, which is useful when cross checking an old invoice.
- Seals are cheap insurance An o-ring that has gone flat, hard or nicked will leak no matter how carefully the housing is tightened.
- Do not stretch it into place Seat a silicone o-ring in its groove without pulling it thin, and use a silicone safe lubricant rather than petroleum grease.
Similar products
Other products people compare with this one.
Product details
This is the replacement silicone o-ring, part number 47044233R, also referenced as PL7130. It measures 7-1/4 in by 7-3/4 in by 1/4 in.
Why silicone
Silicone stays flexible longer than standard rubber in hot, chemically treated water. That matters on a large diameter seal like this one, because a stiff o-ring will not conform to the groove and starts weeping at the first pressure change.
Fitting it
Clean the groove out completely before the new seal goes in. Seat it without stretching it thin, and use a silicone safe pool lubricant rather than petroleum grease, which degrades the material. If the sealing faces are scored or pitted, clean them up as well; a new o-ring will not bridge a damaged surface.
| Brand | Jandy |
|---|---|
| Manufacturer part number | 47044233R |
| Alternate reference | PL7130 |
| UPC | 060993301393 |
| Type | O-ring |
| Material | Silicone |
| Dimensions | 7-1/4 in x 7-3/4 in x 1/4 in |
| Shipping weight | 0.1 lb |
| Ships | Parcel |
Request a quote
Need a volume price, a freight quote, or pricing in writing before you order? We reply the same business day.
Customer reviews
Questions and answers
What people ask about this product, answered by our pool techs.