SuperPro O-484-9 generic filter tank o-ring for Sta-Rite PLM filtersSuperPro Generic Filter Tank O-Ring for Sta-Rite PLM, After 2/97, O-484-9 In stock$1599
SuperPro O-484-9 generic filter tank o-ring for Sta-Rite PLM filters

SuperPro Generic Filter Tank O-Ring for Sta-Rite PLM, After 2/97, O-484-9

Ask a questionMPN O-484-9
$1599
In stock

30 day returns · Easy, with prepaid labels provided

Quick overview

  • Seals the filter tank This is the o-ring between the two halves of the tank, the seal that has to hold when the pump runs.
  • Sized 15-1/4 by 3/8 Listed at a 15-1/4 inch inside diameter with a 3/8 inch cross section.
  • For the later PLM Specified for Sta-Rite PLM filters built after 2/97. Earlier tanks use a different ring.
  • Replaces the Sta-Rite number Sold as the generic equivalent of Sta-Rite 27001-0061, which also appears on our record as 27001-0061S.
  • Generic, not OEM This is the SuperPro aftermarket ring. The genuine Sta-Rite o-ring is listed separately.
  • Lubricate on assembly A tank o-ring seats far better with a smear of silicone lubricant, and it comes out cleanly next time.
Full description and specifications ↓

Need a hand?

Bilingual support from pool professionals.

Send us a message

A pool professional will get back to you, usually the same business day.

About SuperPro Generic Filter Tank O-Ring for Sta-Rite PLM, After 2/97, O-484-9, SKU SPG-601-1216. We will include it with your message.

We use your details to answer this message and nothing else.

Frequently bought together

Current item SuperPro Generic Filter Tank O-Ring for Sta-Rite PLM, After 2/97, O-484-9
Aladdin

SuperPro Generic Filter Tank O-Ring for Sta-Rite PLM, After 2/97, O-484-9

$1599
Sta-Rite 170145 System 3 S7M120 Large and Small Cartridge Set, 25021-0200S and 25022-0201S
Pentair

Sta-Rite 170145 System 3 S7M120 Large and Small Cartridge Set, 25021-0200S and 25022-0201S

$46499
Pentair 6-Position Top Mount Clamp Valve Top Assembly, 272568Z
Pentair

6-Position Top Mount Clamp Valve Top Assembly, 272568Z

$15199
SuperPro Valve Seat Gasket 5 Spoke (5-5/16"), O-176A-9
Aladdin

SuperPro Valve Seat Gasket 5 Spoke (5-5/16"), O-176A-9

$799
Filbur Sta-Rite S7D75 Full Filter Grid Set (11 Grids), FS-3037
Unicel Filter Cartridges

Filbur Sta-Rite S7D75 Full Filter Grid Set (11 Grids), FS-3037

$24599
SuperPro Tank O-Ring (Generic) for Select Hayward® Filters, O-429-9
Aladdin

SuperPro Tank O-Ring (Generic) for Select Hayward® Filters, O-429-9

$1499
Pentair Genuine OEM Valve Body O-Ring for Cristal-Flo II and Sand Dollar Filters, 272541
Pentair

Genuine OEM Valve Body O-Ring for Cristal-Flo II and Sand Dollar Filters, 272541

$1199
Subtotal

Product details

This is the SuperPro generic tank o-ring for Sta-Rite PLM filters built after February 1997. It is the seal that sits between the two halves of the filter tank, listed at a 15-1/4 inch inside diameter with a 3/8 inch cross section.

Matching the number

Our record carries the Sta-Rite equivalent two ways. The product summary calls it 27001-0061 and the substitute part number field lists 27001-0061S. Likewise the SuperPro number appears both as O-484-9 and, in shorter form, as O-484. Compare the number on your filter documentation against all of these rather than assuming one is a typo.

Before you fit it

Confirm the build date of the tank, because PLM filters made before 2/97 use a different ring and the two will not swap. When you assemble, wipe the groove clean and put a light smear of silicone lubricant on the o-ring. It seats properly, it is less likely to roll out of the groove as the clamp comes down, and it will come apart cleanly the next time the filter is opened.

Generic or genuine

This is the aftermarket SuperPro ring. If you would rather fit the factory part, the genuine Sta-Rite tank o-ring for the same after 2/97 application is stocked on its own.

Specifications
Brand SuperPro
Manufacturer part number O-484-9
UPC 601402243745
Type Replacement Filter Tank O-Ring
Inside diameter 15-1/4 in
Cross section 3/8 in
Replaces Sta-Rite 27001-0061
Substitute part numbers 27001-0061S
Also referenced as Generic O-484
Fits Sta-Rite PLM, after 2/97
Shipping weight 0.25 lb
Ships Parcel

Request a quote

Need a volume price, a freight quote, or pricing in writing before you order? We reply the same business day.

Request a quote

Customer reviews

Questions and answers

What people ask about this product, answered by our pool techs.

Which Sta-Rite o-ring does this replace?
Our record gives the Sta-Rite number two ways, as 27001-0061 in the product summary and as 27001-0061S in the substitute part number field. Check the number printed on your filter paperwork against both before ordering.
Is the part number O-484 or O-484-9?
Both appear on our record. O-484-9 is carried as the manufacturer part number and O-484 as the generic reference, so treat them as the same ring.
Does it fit an older PLM filter?
It is specified for PLM filters after 2/97. Tanks built before that date take a different o-ring, so date the filter first.
Is this the genuine Sta-Rite ring?
No. This is the SuperPro generic equivalent. The genuine Sta-Rite tank o-ring for the same application is stocked as a separate item.
Ask your own question