SuperPro Super II Pump Rebuild Kit GO-KIT2-9

The SuperPro GO-KIT2-9 is an aftermarket rebuild kit for the Hayward Super II pump. It gathers the four soft parts that wear out on a Super II into one pack: the diffuser o-ring or gasket, the pump lid o-ring, the housing o-ring or gasket and the pump shaft seal.

Why replace them together

Getting to the shaft seal means pulling the pump apart, and once it is apart the other three seals are already in your hand. Replacing all four at the same time means the pump goes back together sealed everywhere, instead of returning to a fresh leak at the lid or housing a few weeks later.

Before you order

This kit is for the Super II only. It does not include the impeller or any hard parts, and it is not a Hayward branded kit.