Waterway 805-0460 Clearwater II tank lid O-ring, 16-1/4 inch outside diameterWaterway Clearwater II Tank Lid O-Ring, OD 16-1/4", 805-0460 In stock$2299
Waterway 805-0460 Clearwater II tank lid O-ring, 16-1/4 inch outside diameter

Waterway Clearwater II Tank Lid O-Ring, OD 16-1/4", 805-0460

Ask a questionMPN 805-0460
$2299
In stock

30 day returns · Easy, with prepaid labels provided

Quick overview

  • Seals the tank lid This is the O-ring the Clearwater II lid closes onto, the joint that holds filter pressure.
  • Sized 16-1/4 inch Outside diameter 16-1/4 inch, so it drops straight into the groove it was made for.
  • Waterway part 805-0460 The number to match when the old ring is flattened past reading.
  • Stops lid weeping A hardened or nicked ring shows up as a drip or a spray at the lid seam once the pump starts.
  • A service item The lid ring is opened and closed every time the filter is serviced, so it wears out on schedule.
  • Fits the Clearwater II Listed for the Waterway Clearwater II filter tank lid.
Full description and specifications ↓

Need a hand?

Bilingual support from pool professionals.

Send us a message

A pool professional will get back to you, usually the same business day.

About Waterway Clearwater II Tank Lid O-Ring, OD 16-1/4", 805-0460, SKU WWP-051-0460. We will include it with your message.

We use your details to answer this message and nothing else.

Frequently bought together

Current item Waterway Clearwater II Tank Lid O-Ring, OD 16-1/4", 805-0460
Waterway

Clearwater II Tank Lid O-Ring, OD 16-1/4", 805-0460

$2299
Waterway Lock Ring, Pro Clean Plus, 550-0701B
Waterway

Lock Ring, Pro Clean Plus, 550-0701B

$9099
Waterway Tank Body, Crystal Water, Gray, with Label, 550-4407
Waterway

Tank Body, Crystal Water, Gray, with Label, 550-4407

$45699
Waterway Crystal Water Tank O-Ring, 805-0000
Waterway

Crystal Water Tank O-Ring, 805-0000

$3399
Waterway Filter Collar Valve Wrench, 505-1970
Waterway

Filter Collar Valve Wrench, 505-1970

$1999
Waterway Tank Lid with Lock Ring, Pro Clean Plus 125/150 sq ft, 550-0621
Waterway

Tank Lid with Lock Ring, Pro Clean Plus 125/150 sq ft, 550-0621

$25499
Waterway Diverter Spider Gasket, 711-1910B
Waterway

Diverter Spider Gasket, 711-1910B

$2699
Subtotal

Product details

Waterway 805-0460 is the tank lid O-ring for the Clearwater II filter, with a 16-1/4 inch outside diameter. It is the seal between the lid and the tank, and it is what lets a filter hold pressure without leaking.

The symptom

A lid ring almost always announces itself the same way. The filter is fine while the pump is off, then weeps, drips or sprays from the lid seam once the system comes up to pressure. Pull the lid and the old ring will usually be flat sided instead of round, hard instead of supple, or nicked from a previous opening.

Fitting it

Clean the groove and the sealing face before the new ring goes in, since a single piece of grit will hold the joint open. Use a silicone based lubricant intended for pool O-rings and keep petroleum grease away from it. Seat the ring evenly all the way round, then close the lid to the manufacturer figure rather than as tight as it will go, because overtightening damages the ring you just fitted.

Specifications
Brand Waterway
Manufacturer part number 805-0460
UPC 806105268297
Type Tank lid O-ring
Outside diameter 16-1/4 in
Fits Waterway Clearwater II filter
Part type Pool Filter Part
Shipping weight 0.05 lb
Ships Parcel

Request a quote

Need a volume price, a freight quote, or pricing in writing before you order? We reply the same business day.

Request a quote

Customer reviews

Questions and answers

What people ask about this product, answered by our pool techs.

How do I know this is the right O-ring?
Measure the outside diameter of the old ring. This one is 16-1/4 inch OD, Waterway part 805-0460, for the Clearwater II tank lid.
My filter drips at the lid. Is this the fix?
Usually. A lid that weeps or sprays once the pump comes up to pressure is nearly always a flattened, cracked or nicked lid O-ring.
Should I lubricate it?
A silicone based lubricant made for pool O-rings is the normal choice. Petroleum grease attacks the rubber and should be kept away from it.
Is this the same ring on both Clearwater II filter types?
It is listed as the Clearwater II tank lid O-ring. Confirm against the filter you have before ordering, since a lid ring is measured, not guessed.
Ask your own question