Jandy Tail Piece O-Ring, R0449200 In stock$2299
Jandy Tail Piece O-Ring, R0449200
30 day returns · Easy, with prepaid labels provided
Quick overview
- Genuine Jandy Factory part R0449200, not a generic ring pulled from an assortment box.
- Three pump series Listed for the Jandy MaxHP, PlusHP and WaterFeature series pumps.
- Seals the tail piece The tail piece is where the pump meets the plumbing, so this ring stands between pumped water and the deck.
- Cheap part, expensive symptom A weeping tail piece can pull air into the pump and lose prime, which looks like a much bigger fault.
- Correct size matters An O-ring that is close but not right will roll or extrude, so use the part number rather than a lookalike.
- Service item Worth replacing whenever the tail piece comes apart for any other repair.
Need a hand?
Frequently bought together
Jandy Tail Piece O-Ring, R0449200
Similar products
Other products people compare with this one.
Jandy O-Ring, Tail Piece (Set of 2), R0446400$1699
Jandy Drain Plug with O-Ring (Set of 2), R0446000$2099
Jandy Pump Lid Seal Gasket with O-Ring, R0449100$1999
Jandy Blue Pressure O-Ring, R0479000$2499
Jandy Backplate O-Ring for FHPM and VS-FHP Series Pumps, R0480300$2399
Jandy FloPro Lid O-Ring, FHP, R0480200$2099
Jandy Impeller Screw with O-Ring, R0515400$1699
Jandy Pro Series Diffuser O-Ring, R0622000$1699
Jandy Lid Seal, R0446200$3299
Jandy Pump Basket for FHPM/FHP Series Pumps, R0480100$3099
Jandy Mechanical Shaft Seal, 13/16" ID, R0445500$3399
Jandy Filter Basket for PHPF/PHPM/MHPM Series Pumps, R0448900$3099
U.S. Seal Mechanical Seal, 5/8" ID (Generic), PS-4231-OS$1999
Jandy Diffuser and Impeller Hardware O-Ring Kit, R0446500$3899
Jandy 2" x 2" Tailpiece O-Ring and Union Nut Kit, Set of 2, R0327301$4999
Jandy Diffuser with O-Ring & Screw FHPM 1.5-2.5 HP, R0479701$5699
Jandy Diffuser with O-Ring and Screw, R0479702$5699
Jandy 1.5 HP Impeller with O-Ring and Screw, FHPM, R0479603$5999
Jandy 1 HP Impeller with O-Ring and Screw, R0479602$5999
Jandy 2-1/2 HP Impeller with Screw and Back-Up Plate O-Ring, R0479605$5999
Product details
The Jandy R0449200 is the tail piece O-ring used on the MaxHP, PlusHP and WaterFeature series pumps. It is the genuine Jandy part for that joint.
What it seals
The tail piece is the fitting that carries water between the pump and the pool plumbing. The O-ring is the only thing holding that joint watertight. On the suction side a tired ring rarely drips much; instead it draws air, and the pump holds a bubble in the lid, loses prime and moves less water. On the pressure side it simply weeps.
Fitting it
Clean the groove and the mating face before the new ring goes in, and wipe on a thin film of pool grade silicone lubricant so it seats evenly rather than rolling. If the pump is already apart for another repair, this is a sensible ring to renew while access is easy.
| Brand | Jandy |
|---|---|
| Manufacturer part number | R0449200 |
| UPC | 052337022347 |
| Part Type | Pool Pump Part |
| Type | Tail piece O-ring |
| Fits | Jandy MaxHP (MHPM), PlusHP (PHPM/PHPF) and WaterFeature (WFTR) series pumps |
| Shipping weight | 0.05 lb |
| Ships | Parcel |
Request a quote
Need a volume price, a freight quote, or pricing in writing before you order? We reply the same business day.
Customer reviews
Questions and answers
What people ask about this product, answered by our pool techs.
Which pumps does this O-ring fit?
Where does the tail piece O-ring sit?
Should I lubricate it on assembly?
How do I know the O-ring has failed?
Get your unadvertised price ›