Waterway Tiny Might Complete Spa Circulating Pump, 1" Union, 230V In stock$23169
Quick overview
- Complete pump Supplied as the genuine Waterway Tiny Might pump and motor, not a wet end alone.
- Insulated wet end The Tiny Might insulated wet end construction that the model is known for.
- 1/16 HP, single speed A circulation pump, sized to keep water moving rather than to run jets.
- 230V Wired for 230V at 50 or 60 Hz, so check your spa pack voltage before ordering.
- 1 inch threaded union The outside connection is a 1 inch threaded union that measures 1-7/8 inches.
- Widely used Fitted in many spas and hot tubs including Sundance and Sunbelt.
Similar products
Other products people compare with this one.
Product details
This is the Waterway Tiny Might complete spa circulating pump in the 230V, 1 inch union configuration. It is supplied as the genuine Waterway pump and motor with the insulated wet end, listed under model TM-0061N22C3 and JF1GO74N.
What a circulation pump is for
At 1/16 HP and a single speed, this pump is not there to drive jets. It keeps water moving continuously through the spa so that heat is distributed evenly and sanitizer reaches the whole body of water rather than sitting in a stagnant corner. That constant low flow is also why circulation pumps run far more hours than a jet pump and eventually wear out.
Check before you order
Two things decide whether this is the right pump. The first is voltage: this one is 230V at 50 or 60 Hz, and the same Tiny Might is built in 115V as well. The second is the plumbing. The source gives the inside connection as 1/2 inch slip and the outside as a 1 inch threaded union measuring 1-7/8 inches, while the image caption reads 1 inch slip by 1 inch union, so measure what is on your spa rather than assume.
Where it was fitted
The Tiny Might turned up in a great many spas and hot tubs, Sundance and Sunbelt among them. If your old pump carries the TM-0061N22C3 or JF1GO74N marking, this is its replacement.
| Brand | Waterway |
|---|---|
| Manufacturer part number | 3312620-14 |
| UPC | 806105066152 |
| Model | TM-0061N22C3, JF1GO74N |
| Type | Complete insulated wet end spa circulating pump |
| Horsepower | 1/16HP |
| Speed | 1 Speed |
| Voltage | 230V (50/60hZ) |
| Connection, inside | 1/2" SLIP |
| Connection, outside | 1" Threaded Union (Measures 1-7/8") |
| Also listed as | 1" SLIP x 1" Union |
| Application | Swimming pools, spas and hot tubs |
| Shipping weight | 6.2 lb |
| Ships | Parcel |
Request a quote
Need a volume price, a freight quote, or pricing in writing before you order? We reply the same business day.
Customer reviews
More from Waterway
Questions and answers
What people ask about this product, answered by our pool techs.