Waterway O-242 volute o-ring for the Viper pump wet endWaterway Volute O-Ring O-242 In stock$1099
Waterway O-242 volute o-ring for the Viper pump wet end

Waterway Volute O-Ring O-242

Ask a questionMPN O-242
$1099
In stock

30 day returns · Easy, with prepaid labels provided

Quick overview

  • Genuine Waterway part Waterway o-ring O-242, the seal named in the factory wet end breakdown.
  • Volute position This is the o-ring that seals the volute, not the shaft seal and not the lid o-ring.
  • Waterway Viper wet end Listed in the Viper wet end parts diagram.
  • A leak you can chase for hours Water weeping from the seam around the pump body often traces back to a flattened volute o-ring rather than anything more serious.
  • Rubber does not recover O-rings take a set once they have been compressed and heat cycled, so a used one rarely reseals properly after the pump has been opened.
  • Fit it dry of grit Wipe the groove and the mating face clean before the o-ring goes in, since a single grain of sand will hold the seal open.
Full description and specifications ↓

Need a hand?

Bilingual support from pool professionals.

Send us a message

A pool professional will get back to you, usually the same business day.

About Waterway Volute O-Ring O-242, SKU 35-270-1734. We will include it with your message.

We use your details to answer this message and nothing else.

Frequently bought together

Current item Waterway Volute O-Ring O-242
Waterway

Volute O-Ring O-242

$1099
Waterway 6 in. Pump Trap Assembly, 2 in. x 2 in. Ports, 310-6600
Waterway

6 in. Pump Trap Assembly, 2 in. x 2 in. Ports, 310-6600

$7099
Waterway 3/8" Drain Plug, Black, 715-1201
Waterway

3/8" Drain Plug, Black, 715-1201

$499
Waterway Hi-Flo Pump Drain Plug O-Ring, 805-0111
Waterway

Hi-Flo Pump Drain Plug O-Ring, 805-0111

$342
Waterway Pump Union, 2" Nut x 1-1/2" Slip or 2" Spigot, 400-9230
Waterway

Pump Union, 2" Nut x 1-1/2" Slip or 2" Spigot, 400-9230

$799
Waterway O-Ring for 6" Trap Cover, 805-0436
Waterway

O-Ring for 6" Trap Cover, 805-0436

$799
Waterway Union Gasket 2", 711-4010
Waterway

Union Gasket 2", 711-4010

$1099
Subtotal

Product details

The Waterway O-242 is the volute o-ring listed in the Viper wet end parts breakdown. It is the genuine Waterway part.

What it seals

The volute is the shaped housing the impeller spins inside, and this o-ring is what keeps water on the correct side of the joint where the volute meets the rest of the wet end. A pump has several rubber parts and they are easy to confuse: this is not the lid o-ring you see when you open the strainer pot, and it is not the shaft seal behind the impeller.

The symptom

Water seeping from the seam around the pump body, often only when the pump is running and under pressure, is the usual sign that the volute o-ring has gone flat. It is worth checking the housing for cracks and the clamp band for even tension at the same time, since either will produce the same leak.

Fitting

Clean the groove and the mating face before the new o-ring goes in. Grit trapped under an o-ring holds the seal open and puts you straight back where you started.

Specifications
Brand Waterway
Manufacturer part number O-242
Type Volute o-ring
Part type Pool pump part
Position Volute
Fits Waterway Viper pump wet end
Ships Parcel

Request a quote

Need a volume price, a freight quote, or pricing in writing before you order? We reply the same business day.

Request a quote

Customer reviews

Questions and answers

What people ask about this product, answered by our pool techs.

Which o-ring on the pump is this?
The volute o-ring. It seals the volute rather than the pump lid or the shaft, so check which seal is actually leaking before you order.
What pump is it listed for?
The Waterway Viper wet end. It appears in that pump parts breakdown.
Can I reuse the old o-ring after opening the pump?
It is a poor bet. An o-ring that has been compressed and heat cycled takes a permanent set, and it usually will not reseal once disturbed. Replacing it while the pump is open costs far less than opening it twice.
The pump weeps at the seam, is this the fix?
It is the first thing to look at. Water tracking out of the joint around the pump body is the classic symptom of a tired volute o-ring, though a cracked housing or a loose clamp band will do the same thing, so inspect both while you are in there.
Ask your own question